产品工程师邮件常用英语（产品工程师英文自我介绍范文）

1Samples on the way to Austin样品在寄往Austin的途中2Changed the burr side locally局部改变毛边方向3 move forming position

移动成形位置4shortened by 0.4mm缩短0.4mm5enlarge the square hole扩大方孔6add meshes features增加网孔特征7cancle a row of meshes features

取消一行网孔特征8change length of emboss改变凸包长度9change dimensions改变尺寸10revised datum C修订c基准11Change the radius of forming

改变成形半径12add a slot增加槽13reduce the bridge high 降低桥高度14Adding two emboss加两个凸包15reduce the length of the emboss

减小件小凸包长度16have no alternative but除…之外,别无选择17The manager required that we could accept to work all night.

老板要求我们能够接受通宵工作18They are making every effort to decrease the production cost.他们正在尽力减少成本19Never mind不要紧

20Dont worry别担心21Are you sure你肯定吗22Enjoy yourself祝你玩得开心23Just wonderful简直太棒了24Ill try my best 我尽力而为25

Dont let me down别让我失望26I cant follow you 我不懂你说的27Its going too far太离谱了28Time is running out没时间了29allow for

考虑到30in the web在网上31cosmetic defect外观不良32poor incoming part来料不良33excessive gap间隙过大34 Whats up?有什么事吗?35

It is Just what I need这正是我想要的36Its no use complaining发牢骚没什么用37at the/that time在那时38follow out贯彻,执行39Corrective & Preventive Action

矫正与预防措施40A lost chance never returns错失的机会永不再来41I dont think you are right我认为你是不对的42in no time很快,立即43take down

写下,记下44in place适当的,在适当的地方45in connection with和…有关46in the long run从长远看来47in accord with同…相符合,相一致48thanks a lot

非常感谢49mass production量产50Please keep up the good work请保持好的工作状态51Please advise请建议52Duo to由于53Agenda and action item

待议事项和行动项目54Stainless steel不锈钢55Please review attached file for details and advise请核查附件详细内容并回复.56Please keep Josh in the loop for weekly tooling tracker update.

请在发模具追踪表时把Josh加入到邮件列表中.57Please standby for TCR release.请等待TCR发行